Ultra

Keep Sediment And Other Pollutants From Entering The Water System With Ultra-DrainGuard Catch Basin Inserts

Stormwater pollution has become a major concern both locally and on a national level. Ultra-DrainGuards remove waste from stormwater before it can become a problem in the water system.

Helps comply with NPDES, 40 CFR 122.26 (1999) when used as Best Management Practice in Storm Water Pollution Prevention Plans.

Designed for practical use in:

Industrial Facilities - keep oil and other contaminants from entering storm drains.
Construction Sites - capture eroded soil and wind-blown debris.
Parking Lots, "Drive-Up" Retail Facilities - selected geotextiles collect oil, fuel and other contaminants that drip from cars.

Oil & Sediment Model (Part # 9217) — removes up to .87 gallons of hydrocarbons as well as dirt, sand and other contaminants.

Oil & Sediment Plus Model (Part # 9219) — the addition of X-Tex filter strips increases oil and grease absorption by .51 gallons, offering a total capacity of 1.38 gallons of hydrocarbon removal.

Trash & Debris Model (Part # 9227) —designed specifically to catch larger items and floatables like leaves, cigarette butts and paper goods.

ULTRA-DRAINGUARD
Part No.	Description
9217	Oil & Sediment Ultra-Drainguard - 48" L x 36" W x 18" H - 1 pack Performance - Oil: Up to .87 gallons, Sediment: Up to 40 lbs.
9218	Oil & Sediment Ultra-Drainguard - 48" L x 36" W x 18" H - 10 pack Performance - Oil: Up to .87 gallons, Sediment: Up to 40 lbs.
9219	Oil & Sediment Ultra-Drainguard Plus - 48" L x 36" W x 18" H - 1 pack Performance - Oil: Up to 1.38 gallons, Sediment: Up to 40 lbs.
9220	Oil & Sediment Ultra-Drainguard Plus - 48" L x 36" W x 18" H - 10 pack Performance - Oil: Up to 1.38 gallons, Sediment: Up to 40 lbs.
* The total water flow rate through the insert in new condition is in excess of 500 gpm. The bypass rate is approximately 700 gpm.
9227	Trash & Debris Ultra-Drainguard - 48" L x 36" W x 18" H - 1 pack
9229	Trash & Debris Ultra-Drainguard - 48" L x 36" W x 18" H - 10 pack
Performance - 1 cu. ft. (before reaching bypass ports)
9234	Optional grate lifter
9235	Optional grate hook
9236	Optional pop up capacity indicator
9237	Optional retainer - Set of two for catch basins from 22" - 36"
9238	Optional retainer - Set of two for catch basins from 36" - 62"

#9236 - Ultra-DrainGuardPop Up Capacity Indicator^®

Unique Pop Up Capacity Indicator Automatically Signals When It's Time To Install A New Ultra-DrainGuard

Heavy duty magnet securely attaches the reusable indicator to the bottom of the grate.

A tether is attached to a release hook which disengages when the DrainGuard has reached its capacity.

The bright red end cap "pops up" through the grate to visually alert maintenance personnel that the DrainGuard need to be emptied or replaced. The spring-loaded device can be driven over even in the "popped up" position.

Notes:
* The PopUp Capacity Indicator is not designed for use with the Trash & Debris Model.
** The PopUp Capacity Indicator is designed to measure sediment load only and will not alert users to oil or hydrocarbon loads.

#9234 - Ultra-Grate Lifter^®

Ergonomically designed — minimizes potential injuries associated with heavy lifting.
Allows single-person grate lifting — reduces personnel and maintenance costs.
Disassembles quickly for easy transport.
Part # 9234 - Weight: 74 lbs.
Optional 2-piece Carrying Case (p/n 9241) available for easy and convenient storage and transport.

#9235 - Ultra-Grate Hook^®

Heavy duty steel hook fits all grates — protects hands from injury.
Part # 9235, weight 3 lbs.

#9237 & #9238 Ultra-DrainGuardRetainers^®

Keep DrainGuards In Place Without The Use Of Grates

Heavy-Duty coated steel retainers mount on inside
ledge of catch basin — securing DrainGuard when
grating is removed or installed.
Two sizes of telescoping retainers adjust to fit any size storm drain.
For use with all DrainGuards.

#9236 - Ultra-DrainGuardPop Up Capacity Indicator^®

Unique Pop Up Capacity Indicator Automatically Signals When It's Time To Install A New Ultra-DrainGuard
	Heavy duty magnet securely attaches the reusable indicator to the bottom of the grate.
	A tether is attached to a release hook which disengages when the DrainGuard has reached its capacity.
	The bright red end cap "pops up" through the grate to visually alert maintenance personnel that the DrainGuard need to be emptied or replaced. The spring-loaded device can be driven over even in the "popped up" position.

#9234 - Ultra-Grate Lifter^®
	Ergonomically designed — minimizes potential injuries associated with heavy lifting. Allows single-person grate lifting — reduces personnel and maintenance costs. Disassembles quickly for easy transport. Part # 9234 - Weight: 74 lbs. Optional 2-piece Carrying Case (p/n 9241) available for easy and convenient storage and transport.

#9235 - Ultra-Grate Hook^®
	Heavy duty steel hook fits all grates — protects hands from injury. Part # 9235, weight 3 lbs.

#9237 & #9238 Ultra-DrainGuardRetainers^®

Keep DrainGuards In Place Without The Use Of Grates
	Heavy-Duty coated steel retainers mount on inside ledge of catch basin — securing DrainGuard when grating is removed or installed. Two sizes of telescoping retainers adjust to fit any size storm drain. For use with all DrainGuards.

Ultra-DrainGuard®

Keep Sediment And Other Pollutants From Entering The Water System With Ultra-DrainGuard Catch Basin Inserts

#9236 - Ultra-DrainGuard Pop Up Capacity Indicator®

Unique Pop Up Capacity Indicator Automatically Signals When It's Time To Install A New Ultra-DrainGuard

#9234 - Ultra-Grate Lifter®

#9235 - Ultra-Grate Hook®

#9237 & #9238 Ultra-DrainGuard Retainers®

Keep DrainGuards In Place Without The Use Of Grates

Ultra-DrainGuard^®

#9236 - Ultra-DrainGuardPop Up Capacity Indicator^®

#9234 - Ultra-Grate Lifter^®

#9235 - Ultra-Grate Hook^®

#9237 & #9238 Ultra-DrainGuardRetainers^®